Download Print this page

Alcatel-Lucent 7330 Product Information Manual page 247

Intelligent services access manager fiber to the node
Hide thumbs Also See for 7330:

Advertisement

NTP 124 — Install an I-240G-B or I-241G-B indoor ONT
Safety information
Read the following safety information before installing the unit.
NTP 124-2
Danger 1 — Contact the local utility company before you connect the
enclosure to the utilities.
Danger 2 — Observe the local and national laws and regulations that
may be applicable to this installation.
Danger 3 — If the coaxial output of the ONT is connected to the
dwelling infrastructure coaxial distribution system, ensure that the
coaxial distribution system is separately grounded. Grounding of the
dwelling coaxial infrastructure shall use Listed grounding devices and
must be installed in accordance with local Codes and Article 800 of the
National Electric Code, ANSI/NFPA 70, following the manufacturers
instructions.
Warning 1 — This equipment is ESD sensitive. Proper ESD protections
should be used when removing the fiber access cover of the indoor ONT.
Warning 2 — Installation of the supplied ferrite on the Ethernet cable
is required for EMC compliance. Failure to install the supplied ferrite
core may cause interference with TV or radio reception. Alcatel-Lucent
is not responsible for any radio or television interference caused by
using other than the supplied ferrite core or by unauthorized changes or
modifications to this equipment. Unauthorized changes or modifications
could void the user's authority to operate this equipment.
Caution — Keep indoor ONTs out of direct sunlight. Prolonged
exposure to direct sunlight can damage the unit.
Note — Observe the following:
The indoor ONT should be installed in accordance with the
applicable requirements of the NEC or CEC. Local authorities and
practices take precedent when there is conflict between the local
standard and the NEC or CEC.
The indoor ONT must be installed by qualified service personnel.
Indoor ONTs must be installed with cables that are suitably rated
and listed for indoor use.
See
I-240G-B and I-241G-B detailed specifications
and I-241G-B unit data sheet
December 2010
ONT Product Information Guide Edition 01
for the temperature ranges for ONTs.
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
in the
I-240G-B

Advertisement

loading

This manual is also suitable for:

7302