Alcatel-Lucent 7330 Product Information Manual page 175
Intelligent services access manager fiber to the node
Hide thumbs
Also See for 7330:
- Information manual (1074 pages) ,
- Product information manual (420 pages) ,
- Operation and maintenance (20 pages)
Advertisement
Procedure 5-27 To reboot a Package C ONT
1
2
3
Procedures using CLI interface for Package C ONTs
The following procedure provides the steps to reboot an ONT using the CLI interface
provided with Package C ONTs.
Procedure 5-28 To reboot a Package C ONT
1
2
Procedures using butt set
Not applicable.
5.13
Tracing OMCI and protocol traffic
Tracing is a logging of traffic to detect or resolve networking problems. Trace logs
are normally provided to support staff for troubleshooting. You can trace OMCI,
ARP, DHCP, or IGMP protocol traffic.
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
Select the Reboot option from the ONT Admin section of the navigation tree in the
GPON ONT window.
The Reboot window appears; see Figure 5-25.
Figure 5-25 Reboot window
Click Reset to reboot the system.
STOP. This procedure is complete.
Type R or r for Reboot from the
STOP. This procedure is complete.
December 2010
Edition 01 ONT Product Information Guide
5 — ONT management using an ONT interface
SLID menu
at any time during the session.
5-43
Advertisement
