Alcatel-Lucent 7330 Product Information Manual page 183

Procedure 5-34 To disable tracing in logging mode
Use this procedure to disable tracing in logging mode. You must disable tracing before
copying the trace log to a TFTP server.
1
2
3
4
5
Procedure 5-35 To copy a trace log to a TFTP server
Use this procedure to copy a trace log to a specified file on a TFTP server. You must
specify the trace log, the IP address of the TFTP server, and the file name of the log
file on the TFTP server.
1
2
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
Choose option 9, Enable protocol traces, from the
following menu of options appears:
Please select protocol
===============
1. OMCI
2. DHCP
3. ARP
4. IGMP
5. Logging options
Enter choice :
Choose one of the following protocols to disable tracing:
a Choose option 1 for OMCI.
b Choose option 2 for DHCP.
c Choose option 3 for ARP.
d Choose option 4 for IGMP.
After you choose a protocol, the following trace options appear:
Trace options
===============
1. Real-time traces
2. Enable logging
3. Disable logging
Enter choice :
Choose option 3, Disable logging. The following message appears:
Press enter key to continue...
Press ↵ to continue. The
STOP. This procedure is complete.
Ensure tracing has been disabled, using Procedure 5-34.
Choose option 10, Upload traces from the
of options appears:
December 2010
Edition 01 ONT Product Information Guide
5 — ONT management using an ONT interface
Secondary menu appears.
Secondary
Secondary menu. The
menu. The following menu
5-51