Alcatel-Lucent 7330 Product Information Manual page 237

14 — I-240G-B and I-241G-B unit data sheet
14.1 I-240G-B and I-241G-B part numbers and identification
Table
ONTs.
Table 14-1 I-240G-B and I-241G-B part numbers and identification
Part number Mnemonic
3FE 51880 AB I-240G-B
3FE 51880 AA I-241G-B
Note
(1)
See Chapter 2 Part numbers, ordering, and deployment configuration overview
14.2 I-240G-B and I-241G-B general description
I-240G-B and I-241G-B indoor ONTs provide a subscriber interface for the system.
The ONT terminates the PON interface and converts it to user interfaces that directly
connect to subscriber devices. The ONT is compatible with all existing subscriber
equipment, including analog phones with both tone and rotary dial capabilities,
cordless phones, modems, fax machines, and caller ID boxes (Type I, Type II, and
Type III).
The I-240G-B and I-241G-B indoor ONTs are not temperature hardened. These
ONTs are intended for indoor deployment only and can be installed vertically or
horizontally on a flat surface as well as attached to a wall.
These ONTs provide the following functions:
•
network demarcation for all services
•
voice interworking function from the analog POTS lines to the VoIP/Ethernet
layers
•
interworking functions between the GEM and Ethernet layers
•
mux and demux functions to the PON
•
optical to electrical conversion
•
optics that support received signal strength indication (RSSI)
•
G984.4 standard and revised compliant OMCI interface for ONT management
and provisioning
14-2
14-1 provides identification information about I-240G-B and I-241G-B indoor
(1) Description
GPON I-series ONT unit, version B, 2 POTS
and 4 Ethernet interfaces.
GPON I-series ONT unit, version B, 2
POTS, 4 Ethernet, and 1 RF video
interfaces.
December 2010
ONT Product Information Guide Edition 01
CLEI
—
—
for ordering information.
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
CPR ECI/Bar
code
— —
— —