Alcatel-Lucent 7330 Product Information Manual page 248
Intelligent services access manager fiber to the node
Hide thumbs
Also See for 7330:
- Information manual (1074 pages) ,
- Product information manual (420 pages) ,
- Operation and maintenance (20 pages)
Advertisement
Procedure
Use this procedure to install an I-240G-B or I-241G-B indoor ONT.
1
2
3
4
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
3FE 54017 AAAA TCZZA
Prepare the cables at the site where the ONT will be installed (DLP 100).
Are any of the cables missing?
a
If yes, go to step 3.
b
If no, go to step 4.
Locate each missing cable and route them to the ONT as per local practices.
Place the indoor ONT unit:
a
On the flat surface, such as a desk, horizontally resting on its four feet as
shown in Figure
NTP
Figure NTP 124-1: I-240G-B or I-241G-B indoor ONT on a desk
b
In the stand mount.
i
Place the stand mount on the flat surface.
ii
Place the ONT into the opening on the stand mount, ensuring it is
securely held. Figure
December 2010
Edition 01 ONT Product Information Guide
NTP 124 — Install an I-240G-B or I-241G-B indoor ONT
124-1; go to step 5.
NTP 124-2
shows the stand mount.
20430
NTP 124-3
Advertisement
