Alcatel-Lucent 7330 Product Information Manual page 209

13 — I-241G-A unit data sheet
I-241G-A connections and components
The I-241G-A ONTs are for indoor deployment and can be installed vertically or
horizontally. Connections to the SC/APC, RJ-45, RJ-11, and coaxial connectors are
on the outside of the ONT.
Figure
Table
Connection
POTS connections
RF video coaxial
connector (Type F)
Fiber optic port
Ethernet ports
Power
13.5 I-241G-A ONT LEDs
Figure
13-4
13-1 shows the physical connections for I-241G-A indoor ONTs.
Figure 13-1 I-241G-A indoor ONT connections
Video coaxial
connector
13-4 describes the I-241G-A indoor ONT physical connections.
Table 13-4 I-241G-A indoor ONT connections
Description
This connection is provided through an RJ-11 phone connector.
This connection is provided through a coaxial cable.
This connection is provided through a fiber optic cable.
This connection is provided through an Ethernet RJ-45 cable. Up to four
Ethernet connections are supported.The Ethernet port can support both
data and in-band video services on all four interfaces.
This connection is provided through a cable to the ac/dc power converter.
13-2 shows the I-241G-A indoor ONT LEDs.
December 2010
ONT Product Information Guide Edition 01
2 1 1 2 3
RJ-11 phone Ethernet
connectors ports
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.41
PON
4
Power
Fiber optic
connection
port
19397
3FE 54017 AAAA TCZZA