Figure 24-4 Menu 3.2: Tcp/Ip And Dhcp Ethernet Setup; Table 24-1 Dhcp Ethernet Setup Menu Fields - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

First address in
the IP Pool
DHCP= Server
Client IP Pool:
Starting Address= 192.168.1.33
Size of Client IP Pool= 32
First DNS Server= From ISP
IP Address= N/A
Second DNS Server= From ISP
IP Address= N/A
Third DNS Server= From ISP
IP Address= N/A

Figure 24-4 Menu 3.2: TCP/IP and DHCP Ethernet Setup

Follow the instructions in the next table on how to configure the DHCP fields.

Table 24-1 DHCP Ethernet Setup Menu Fields

FIELD
DHCP
Client IP Pool:
Starting Address
Size of Client IP
Pool
First DNS Server
Second DNS Server
Third DNS Server
Use the instructions in the following table to configure TCP/IP parameters for the LAN port.
LAN Setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:
This field enables/disables the DHCP server.
If set to Server, your ZyWALL will act as a DHCP server.
If set to None, the DHCP server will be disabled.
When set to Server, the following items need to be set:
This field specifies the first of the contiguous addresses in the IP
address pool.
This field specifies the size, or count of the IP address pool.
Press [SPACE BAR] to select From ISP, User Defined, DNS Relay
or None and press [ENTER].
The DNS servers are passed to the DHCP clients along with the IP
address and the subnet mask
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
DESCRIPTION
ZyWALL 2 Series User's Guide
Size of the IP
Pool
IP addresses of the
DNS servers
EXAMPLE
192.168.1.33
From ISP
Server
32
24-3