Tcp/Ip And Dhcp Ethernet Setup; Figure 3-3 Menu 3 - Lan Setup (10/100 Mbps Ethernet); Figure 3-4 Menu 3.2 - Tcp/Ip And Dhcp Ethernet Setup - ZyXEL Communications Prestige 314 User Manual

3.2

TCP/IP and DHCP Ethernet Setup

From the main menu, enter 3 to open Menu 3 - LAN Setup (10/100 Mbps Ethernet) to configure TCP/IP
(RFC 1155) and DHCP Ethernet setup.
Figure 3-3 Menu 3 — LAN Setup (10/100 Mbps Ethernet)
To edit the TCP/IP and DHCP configuration, enter 2 to display Menu 3.2 - TCP/IP and DHCP Ethernet
Setup as shown next.
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
DHCP Server Address = N/A
TCP/IP Setup:
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 3-4 Menu 3.2 — TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table on how to configure the DHCP fields.
Internet Access
Prestige 314 Broadband Sharing Gateway with 4-Port Switch
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
First address
in the IP
Pool.
Size of the IP
Pool.
IP addresses
of the DNS
servers.
This is the IP
address of the
Prestige.
3-5