ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual page 580

ZyWALL 2 User's Guide
FUNCTION
config edit firewall set <set #>
rule <rule #> TCP destport-single
<port #>
config edit firewall set <set #>
rule <rule #> TCP destport-range
<start port #> <end port #>
config edit firewall set <set #>
rule <rule #> UDP destport-single
<port #>
config edit firewall set <set #>
rule <rule #> UDP destport-range
<start port #> <end port #>
D e l e t e
D e l e t e
config delete firewall e-mail
config delete firewall attack
config delete firewall set <set #>
config delete firewall set <set #>
rule
<rule #>
L-6
Chart L-1 Firewall Commands
COMMAND DESCRIPTION
This command sets a rule to have the ZyWALL
check for TCP traffic with this destination address.
You may repeat this command to enter various,
non-consecutive port numbers.
This command sets a rule to have the ZyWALL
check for TCP traffic with a destination port in this
range.
This command sets a rule to have the ZyWALL
check for UDP traffic with this destination address.
You may repeat this command to enter various,
non-consecutive port numbers.
This command sets a rule to have the ZyWALL
check for UDP traffic with a destination port in this
range.
This command removes all of the settings for e-mail
alert.
This command resets all of the attack response
settings to their defaults.
This command removes the specified set from the
firewall configuration.
This command removes the specified rule in a
firewall configuration set.
Firewall Commands