Configuring Telnet; Figure 17-19 Telnet; Table 17-3 Telnet - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual
Internet security gateway
Hide thumbs
Also See for Internet Security Gateway ZyWALL 2 Series:
- User manual (686 pages) ,
- Quick start manual (137 pages) ,
- Firmware release notes (43 pages)
Table of Contents
Advertisement
ZyWALL 2 Series User's Guide
17.12 Configuring TELNET
Click REMOTE MGNT to open the TELNET screen.
The following table describes the labels in this screen.
LABEL
Server Port
Server Access
Secure Client IP
Address
Apply
Reset
17-20
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyWALL using this
service.
A secure client is a "trusted" computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Figure 17-19 Telnet
Table 17-3 Telnet
DESCRIPTION
Remote Management Screens
Advertisement
Table of Contents
