Figure 232 Menu 3.2: Tcp/Ip And Dhcp Ethernet Setup; Table 160 Menu 3.2: Dhcp Ethernet Setup Fields - ZyXEL Communications ZyWALL 5 User Manual

Hide thumbs Also See for ZyWALL 5:

Table of Contents

Figure 232 Menu 3.2: TCP/IP and DHCP Ethernet Setup

DHCP= Server

Client IP Pool:

First DNS Server= From ISP

Second DNS Server= From ISP

Third DNS Server= From ISP

DHCP Server Address= N/A

Follow the instructions in the next table on how to configure the DHCP fields.

Client IP Pool:

Starting Address

Size of Client IP

Chapter 28 LAN Setup

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

Starting Address= 192.168.1.33

Size of Client IP Pool= 128

IP Address= N/A

Press ENTER to Confirm or ESC to Cancel:

This field enables/disables the DHCP server.

If set to Server, your ZyWALL will act as a DHCP server.

If set to None, the DHCP server will be disabled.

If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays requests

and responses between the remote server and the clients.

When set to Server, the following items need to be set:

This field specifies the first of the contiguous addresses in the IP address pool.

This field specifies the size, or count of the IP address pool.

ZyWALL 5 User's Guide

TCP/IP Setup:

IP Address= 192.168.1.1

IP Subnet Mask= 255.255.255.0

RIP Direction= Both

Version= RIP-1

Multicast= None

Edit IP Alias= No