Configuring Password - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

LABEL
Host Names 1~3
User
Password
Enable Wildcard
Off Line
Edit Update IP Address:
Server Auto Detect
User Specify
IP Addr
Apply
Reset
4.5

Configuring Password

To change your ZyWALL's password (recommended), click SYSTEM, then the Password tab. The screen
appears as shown. This screen allows you to change the ZyWALL's password.
System
Table 4-2 DDNS
Enter the host names in the three fields provided. You can specify up to two host
names in each field separated by a comma (",").
Enter your user name. You can use up to 31 alphanumeric characters (and the
underscore). Spaces are not allowed.
Enter the password associated with the user name above. You can use up to 31
alphanumeric characters (and the underscore). Spaces are not allowed.
Select the check box to enable DYNDNS Wildcard.
This option is available when CustomDNS is selected in the DDNS Type field.
Check with your Dynamic DNS service provider to have traffic redirected to a
URL (that you can specify) while you are off line.
Select this option to update the IP address of the host name(s) automatically by
the DDNS server. It is recommended that you select this option.
Select this option to update the IP address of the host name(s) to the IP address
specified below. Use this option if you have a static IP address.
Enter the IP address if you select the User Specify option.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 2 Series User's Guide
DESCRIPTION
4-5