Figure 24-8 Menu 3.5: Wireless Lan Setup; Table 24-4 Menu 3.5: Wireless Lan Setup - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

The settings of all client stations on the wireless LAN must match those of the
Follow the instructions in the next table on how to configure the wireless LAN parameters.
FIELD
Enable Press [SPACE BAR] to select Yes to turn on the wireless LAN. The
Wireless LAN wireless LAN is off by default. Configure wireless LAN security features
such as Mac filters and 802.1X before you turn on the wireless LAN.
ESSID (Extended Service Set IDentification) The ESSID identifies the AP to
which the wireless stations associate. Wireless stations associating to
the Access Point must have the same ESSID. Enter a descriptive name
(up to 32 characters) for the wireless LAN.
Hide ESSID Press [SPACE BAR] to select Yes to hide the ESSID in the outgoing
beacon frame so a station cannot obtain the ESSID through passive
scanning.
Channel ID This allows you to set the operating frequency/channel depending on
your particular region. Use the [SPACE BAR] to select a channel.
RTS (Request To Send) The threshold (number of bytes) for enabling
Threshold RTS/CTS handshake. Data with its frame size larger than this value will
perform the RTS/CTS handshake. Setting this attribute to be larger than
the maximum MSDU (MAC service data unit) size turns off the RTS/CTS
handshake. Setting this attribute to zero turns on the RTS/CTS
handshake. Enter a value between 0 and 2432.
LAN Setup
Menu 3.5 - Wireless LAN Setup
Enable Wireless LAN= No
ESSID= Wireless
Hide ESSID= No
Channel ID= CH01 2412MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Edit MAC Address Filter= No
Press ENTER to Confirm or ESC to Cancel:

Figure 24-8 Menu 3.5: Wireless LAN Setup

ZyWALL.

Table 24-4 Menu 3.5: Wireless LAN Setup

DESCRIPTION
ZyWALL 2 Series User's Guide
EXAMPLE
(default)
Wireless
(default)
CH01 2412
(default)
No
No
MHz
2432
24-7