ZyWALL 2 Series User's Guide
monitor your ZyWALL. Specifically, it gives you information on your system firmware version, number of
packets sent and number of packets received.
To get to the System Status:
Step 1.
Enter number 24 to go to Menu 24 - System Maintenance.
Step 2.
In this menu, enter 1 to open System Maintenance - Status.
Step 3.
There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the
WAN connection, 9 resets the counters and [ESC] takes you back to the previous screen.
Port
Status
WAN
Down
LAN
100M/Full
Port
Ethernet Address
WAN
00:A0:C5:00:00:02
LAN
00:A0:C5:00:00:01
System up Time:
Name:
Routing: IP
ZyNOS F/W Version: V3.62(WK.0)b1 | 10/24/2003
The following table describes the fields present in Menu 24.1 - System Maintenance - Status. These fields
are READ-ONLY and meant for diagnostic purposes. The upper right corner of the screen shows the time
and date according to the format you set in menu 24.10.
Table 32-1 System Maintenance: Status Menu Fields
FIELD
Port
32-2
Menu 24.1 - System Maintenance - Status
TxPkts
0
5818
IP Address
192.168.1.1
7:31:36
COMMANDS: 1-Drop WAN 9-Reset Counters
Figure 32-2 Menu 24.1: System Maintenance: Status
Identifies a port (WAN, or LAN) on the ZyWALL.
RxPkts
Cols
Tx B/s
0
0
6760
0
IP Mask
0.0.0.0
0.0.0.0
255.255.255.0
Press Command:
DESCRIPTION
09:41:41
Thu. Nov. 13, 2003
Rx B/s
Up Time
0
0
0:00:00
0
0
7:31:30
DHCP
Client
Server
ESC-Exit
System Information and Diagnosis