Ipsec Setup - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

FIELD
Select Press [SPACE BAR] to choose from None, Edit, Delete, Go To Rule,
Command Next Page or Previous Page and then press [ENTER]. You must select a
rule in the next field when you choose the Edit, Delete or Go To
commands.
Select None and then press [ENTER] to go to the "Press ENTER to
Confirm..." prompt.
Use Edit to create or edit a rule. Use Delete to remove a rule. To edit or
delete a rule, first make sure you are on the correct page. When a VPN
rule is deleted, subsequent rules do not move up in the page list.
Use Go To Rule to view the page where your desired rule is listed.
Select Next Page or Previous Page to view the next or previous page of
rules (respectively).
Select Rule Type the VPN rule index number you wish to edit or delete and then press
[ENTER].
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.

37.3 IPSec Setup

Select Edit in the Select Command field; type the index number of a rule in the Select Rule field and press
[ENTER] to edit the VPN using the menu shown next.
VPN/IPSec Setup
Table 37-1 Menu 27.1: IPSec Summary
DESCRIPTION
ZyWALL 2 Series User's Guide
EXAMPLE
None
3
37-5