Figure 26-8 Menu 11.6: Traffic Redirect Setup; Table 26-5 Menu 11.1: Remote Node Profile (Traffic Redirect Field) - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

Table 26-5 Menu 11.1: Remote Node Profile (Traffic Redirect Field)

FIELD
Edit Traffic Press [SPACE BAR] to select Yes or No.
Redirect
Select No (default) if you do not want to configure this feature.
Select Yes and press [ENTER] to configure Menu 11.6 — Traffic Redirect
Setup.
Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC] at
any time to cancel.
26.5.1 Traffic Redirect Setup
Configure parameters that determine when the ZyWALL will forward WAN traffic to the backup gateway
using Menu 11.6 — Traffic Redirect Setup.
The following table describes the fields in this screen.
Remote Node Setup
DESCRIPTION
Menu 11.6 - Traffic Redirect Setup
Active= No
Configuration:
Backup Gateway IP Address= 0.0.0.0
Metric= 14
Check WAN IP Address= 0.0.0.0
Fail Tolerance= 2
Period(sec)= 5
Timeout(sec)= 3
Press ENTER to Confirm or ESC to Cancel:

Figure 26-8 Menu 11.6: Traffic Redirect Setup

ZyWALL 2 Series User's Guide
EXAMPLE
Yes
26-11