Figure 34-2 Valid Commands; Table 34-1 Valid Commands - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

ZyWALL 2 User's Guide
34.1.1 Command Syntax
The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means "or".
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.
34.1.2 Command Usage
A list of commands can be found by typing help or ? at the command prompt. Always type the full
command. Type exit to return to the SMT main menu when finished.
Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
poe
ip
cnm
ras>
The following table describes some commands in this screen.
COMMAND
sys The system commands display device information and configure device settings.
exit This command returns you to the SMT main menu.
34-2
exit device
pptp config
ipsec ppp
radius

Figure 34-2 Valid Commands

Table 34-1 Valid Commands

ether
radius
certificates
DESCRIPTION
System Maintenance & Information