Summary Screen; Figure 14-1 Ipsec Summary Fields - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

ZyWALL 2 Series User's Guide
You can also enter a remote secure gateway's domain name in the Secure Gateway Address field if the
remote secure gateway has a dynamic WAN IP address and is using DDNS. The ZyWALL has to rebuild the
VPN tunnel each time the remote secure gateway's WAN IP address changes (there may be a delay until the
DDNS servers are updated with the remote gateway's new WAN IP address).
14.4.1 Dynamic Secure Gateway Address
If the remote secure gateway has a dynamic WAN IP address and does not use DDNS, enter 0.0.0.0 as the
secure gateway's address. In this case only the remote secure gateway can initiate SAs.
The Secure Gateway IP Address may be configured as 0.0.0.0 only when using IKE
key management and not Manual key management.

14.5 Summary Screen

The following figure helps explain the main fields in the web configurator.
Local and remote IP addresses must be static.

Figure 14-1 IPSec Summary Fields

Click VPN to open the VPN Rules screen. This is a read-only menu of your IPSec rules (tunnels). Edit or
create an IPSec rule by selecting an index number and then clicking Edit to configure the associated
submenus.
VPN Screens 14-3