Figure 24-7 Menu 3.2.1: Ip Alias Setup; Table 24-3 Menu 3.2.1: Ip Alias Setup - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

Figure 24-5 Physical Network
You must use menu 3.2 to configure the first network. Move the cursor to the Edit IP Alias field, press
[SPACE BAR] to choose Yes and press [ENTER] to configure the second and third network.
Press [ENTER] to open Menu 3.2.1 - IP Alias Setup, as shown next.
Use the instructions in the following table to configure IP Alias parameters.
FIELD
IP Alias 1, 2
LAN Setup
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:

Figure 24-7 Menu 3.2.1: IP Alias Setup

Table 24-3 Menu 3.2.1: IP Alias Setup

Choose Yes to configure the LAN network for the ZyWALL.
Figure 24-6 Partitioned Logical Network
DESCRIPTION
ZyWALL 2 Series User's Guide
DEFAULT
Yes
24-5