ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual page 71

LABEL
Time Server
Address
Synchronize Now
Current Time
New Time
Current Date
New Date
Time Zone
Daylight Savings
Start Date
End Date
Apply
Reset
System
Table 4-5 Time Setting
Enter the address of your time server. Check with your ISP/network administrator if
you are unsure of this information (the default is tick.stdtime.gov.tw).
Click this button to get the time and date from the time server you specified above.
This field displays the time of your ZyWALL.
Each time you reload this page, the ZyWALL synchronizes the time with the time
server.
This field displays the last updated time from the time server.
When you select None in the Time Protocol field, enter the new time in this field
and then click Apply.
This field displays the date of your ZyWALL.
Each time you reload this page, the ZyWALL synchronizes the date with the time
server.
This field displays the last updated date from the time server.
When you select None in the Time Protocol field, enter the new date in this field
and then click Apply.
Choose the time setting of your location. This will set the time difference between
your time zone and Greenwich Mean Time (GMT).
Select this option if you use daylight savings time. Daylight saving is a period from
late spring to early fall when many countries set their clocks ahead of normal local
time by one hour to give more daytime light in the evening.
Enter the month and day that your daylight-savings time starts on if you selected
Daylight Savings.
Enter the month and day that your daylight-savings time ends on if you selected
Daylight Savings.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 2 Series User's Guide
DESCRIPTION
4-9