Table 24-2 Lan Tcp/Ip Setup Menu Fields - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

ZyWALL 2 Series User's Guide
FIELD
TCP/IP Setup:
IP Address
IP Subnet Mask
RIP Direction
Version
Multicast
Edit IP Alias
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to save
your configuration, or press [ESC] at any time to cancel.
24.4.1 IP Alias Setup
IP alias allows you to partition a physical network into different logical networks over the same Ethernet
interface. The ZyWALL supports three logical LAN interfaces via its single physical Ethernet interface with
the ZyWALL itself as the gateway for each LAN network.
24-4

Table 24-2 LAN TCP/IP Setup Menu Fields

Enter the IP address of your ZyWALL in dotted decimal notation
Your ZyWALL will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the ZyWALL.
Press [SPACE BAR] and then [ENTER] to select the RIP direction.
Options are: Both, In Only, Out Only or None.
Press [SPACE BAR] and then [ENTER] to select the RIP version.
Options are:
RIP-1, RIP-2B or RIP-2M.
IGMP (Internet Group Multicast Protocol) is a session-layer
protocol used to establish membership in a Multicast group. The
ZyWALL supports both IGMP version 1 (IGMP-v1) and version 2
(IGMP-v2). Press [SPACE BAR] and then [ENTER] to enable IP
Multicasting or select None (default) to disable it.
The ZyWALL supports three logical LAN interfaces via its single
physical Ethernet interface with the ZyWALL itself as the gateway
for each LAN network. Press [SPACE BAR] to select Yes and then
press [ENTER] to display menu 3.2.1
DESCRIPTION EXAMPLE
192.168.1.1
(default)
255.255.255.0
Both
(default)
RIP-1
(default)
None
Yes
LAN Setup