Figure 11-5 Adding/Editing Source And Destination Addresses - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

LABEL
Log
Alert
Apply
Cancel
11.6.2 Configuring Source and Destination Addresses
To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To edit an
existing source or destination address, select it from the box and click SrcEdit or DestEdit from the previous
screen. Either action displays the following screen.

Figure 11-5 Adding/Editing Source and Destination Addresses

The following table describes the fields in this screen.
Firewall Screens
Table 11-2 Creating/Editing A Firewall Rule
This field determines if a log is created for packets that match the rule (Match),
don't match the rule (Not Match), both (Both) or no log is created (None). Go to
the Log Settings page and select the Access Control logs category to have the
ZyWALL record these logs.
Check the Alert check box to determine that this rule generates an alert when the
rule is matched.
Click Apply to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving,
ZyWALL 2 Series User's Guide
DESCRIPTION
11-11