Figure 26-3 Menu 11.1: Remote Node Profile For Pptp Encapsulation; Table 26-3 Fields In Menu 11.1 (Pptp Encapsulation) - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

ZyWALL 2 Series User's Guide
26.2.3 PPTP Encapsulation
If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen. Please see the
appendix for information on PPTP.
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPTP
Service Type= Standard
Service Name= N/A
Outgoing:
PPTP:

Figure 26-3 Menu 11.1: Remote Node Profile for PPTP Encapsulation

The next table shows how to configure fields in menu 11.1 not previously discussed.
FIELD
Encapsulation
PPTP:
My IP Addr
My IP Mask
My Server IP Addr
Connection
ID/Name
26-6
Menu 11.1 - Remote Node Profile
My Login=
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
My IP Addr=
My IP Mask=
Server IP Addr=
Connection ID/Name=
Press ENTER to Confirm or ESC to Cancel:

Table 26-3 Fields in Menu 11.1 (PPTP Encapsulation)

Press [SPACE BAR] and then [ENTER] to select PPTP. You must
also go to menu 11.3 to check the IP Address setting once you
have selected the encapsulation method.
Enter the IP address of the WAN Ethernet port.
Enter the subnet mask of the WAN Ethernet port.
Enter the IP address of the ANT modem.
Enter the connection ID or connection name in the ANT. It must
follow the "c:id" and "n:name" format.
This field is optional and depends on the requirements of your DSL
modem.
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
DESCRIPTION EXAMPLE
PPTP
10.0.0.140
255.255.255.0
10.0.0.138
N:My ISP
Remote Node Setup