ZyAIR Wireless Gateway Series User's Guide
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu
to define the filter sets.
19.2 TCP/IP Ethernet and DHCP Setup
Use menu 3.2 to configure your ZyAIR for TCP/IP.
To edit menu 3.2, enter 3 from the main menu to display Menu 3-Ethernet Setup. When menu 3 appears,
press 2 and press [ENTER] to display Menu 3.2-TCP/IP and DHCP Ethernet Setup, as shown next
IP addresses
of the DNS
servers
Figure 19-3 Menu 3.2 TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table on how to configure the DHCP fields.
19-2
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Client IP Pool:
Starting Address= 192.168.1.33
Size of Client IP Pool= 32
First DNS Server= From ISP
IP Address= N/A
Second DNS Server= From ISP
IP Address= N/A
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
First address in
the IP pool
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
Size of the IP
pool
:
This is the IP
address of the
ZyAIR.
LAN Setup