ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual page 392

ZyWALL 2 Series User's Guide
FIELD
Encapsulation
Service Type
Note: DSL users must choose the Standard option only. The My Login, My Password and Login Server
fields are not applicable in this case.
My Login
My Password
Retype to Confirm
Login Server
Relogin Every (min)
IP Address
Assignment
IP Address
IP Subnet Mask
Gateway IP
Address
Network Address
Translation
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
25-2
Table 25-1 Menu 4: Internet Access Setup (Ethernet)
Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The
encapsulation method influences your choices for the IP Address field.
Press [SPACE BAR] and then [ENTER] to select Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner
Manager authentication method), RR-Telstra or Telia Login. Choose a
RoadRunner service type if your ISP is Time Warner's RoadRunner; otherwise
choose Standard.
Enter the login name given to you by your ISP.
Enter the password associated with the login name above.
Enter your password again to make sure that you have entered is correctly.
The ZyWALL will find the RoadRunner Server IP if this field is left blank. If it does
not, then you must enter the authentication server IP address.
This field is available when you select Telia Login in the Service Type field.
The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.
Type the number of minutes from 1 to 59 (30 recommended) for the ZyWALL to wait
between logins.
If your ISP did not assign you a fixed IP address, press [SPACE BAR] and then
[ENTER] to select Dynamic, otherwise select Static and enter the IP address and
subnet mask in the following fields.
Enter the (fixed) IP address assigned to you by your ISP (static IP address
Assignment is selected in the previous field).
Enter the subnet mask associated with your static IP.
Enter the gateway IP address associated with your static IP.
Please see the NAT chapter for a more detailed discussion on the Network Address
Translation feature. The choices are Full Feature, None or SUA Only.
DESCRIPTION
Internet Access