Figure 23-4 Menu 11.1 Remote Node Profile (Backup Isp); Table 23-5 Menu 11.1 Remote Node Profile (Backup Isp) - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

ZyWALL 2 Series User's Guide
Rem Node Name= ?
Active= Yes
Outgoing:
My Login=
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
Pri Phone #= ?
Sec Phone #=

Figure 23-4 Menu 11.1 Remote Node Profile (Backup ISP)

The following table describes the fields in this menu.
FIELD
Rem Node Enter a descriptive name for the remote node. This field can be up to
Name eight characters.
Press [SPACE BAR] and then [ENTER] to select Yes to enable the
Active
remote node or No to disable the remote node.
Outgoing
My Login Enter the login name assigned by your ISP for this remote node.
My Password Enter the password assigned by your ISP for this remote node.
Retype to Enter your password again to make sure that you have entered is
Confirm correctly.
Authen This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP - Your ZyWALL will accept either CHAP or PAP when
requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
23-6
Menu 11.1 - Remote Node Profile (Backup ISP)
Press ENTER to Confirm or ESC to Cancel:

Table 23-5 Menu 11.1 Remote Node Profile (Backup ISP)

Edit PPP Options= No
Rem IP Addr= ?
Edit IP= No
Edit Script Options= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
DESCRIPTION EXAMPLE
LAoffice
CHAP/PAP
WAN and Dial Backup Setup
Yes
jim
*****