Threshold Values - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

ZyWALL 2 Series User's Guide

11.9.1 Threshold Values

Tune these parameters when something is not working and after you have checked the firewall counters.
These default values should work fine for normal small offices with ADSL bandwidth. Factors influencing
choices for threshold values are:
1. The maximum number of opened sessions.
2. The minimum capacity of server backlog in your LAN network.
3. The CPU power of servers in your LAN network.
4. Network bandwidth.
5. Type of traffic for certain servers.
If your network is slower than average for any of these factors (especially if you have servers that are slow or
handle many tasks and are often busy), then the default values should be reduced.
You should make any changes to the threshold values before you continue configuring firewall rules.
11.9.2 Half-Open Sessions
An unusually high number of half-open sessions (either an absolute number or measured as the arrival rate)
could indicate that a Denial of Service attack is occurring. For TCP, "half-open" means that the session has
not reached the established state-the TCP three-way handshake has not yet been completed (see Figure 10-2).
For UDP, "half-open" means that the firewall has detected no return traffic.
The ZyWALL measures both the total number of existing half-open sessions and the rate of session
establishment attempts. Both TCP and UDP half-open sessions are counted in the total number and rate
measurements. Measurements are made once a minute.
When the number of existing half-open sessions rises above a threshold (max-incomplete high), the
ZyWALL starts deleting half-open sessions as required to accommodate new connection requests. The
ZyWALL continues to delete half-open requests as necessary, until the number of existing half-open sessions
drops below another threshold (max-incomplete low).
When the rate of new connection attempts rises above a threshold (one-minute high), the ZyWALL starts
deleting half-open sessions as required to accommodate new connection requests. The ZyWALL continues to
delete half-open sessions as necessary, until the rate of new connection attempts drops below another
threshold (one-minute low). The rate is the number of new attempts detected in the last one-minute sample
period.
TCP Maximum Incomplete and Blocking Period
An unusually high number of half-open sessions with the same destination host address could indicate that a
Denial of Service attack is being launched against the host.
Firewall Screens 11-21