Figure 28-6 Menu 15.1.1: First Set - ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

ZyWALL 2 Series User's Guide
Set Name= ?
Idx Local Start IP
--- ---------------
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1
Ordering Your Rules
Ordering your rules is important because the ZyWALL applies the rules in the order that you specify. When a
rule matches the current packet, the ZyWALL takes the corresponding action and the remaining rules are
ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed up
by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current set
and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6
becomes rule 5 and old rule 7 becomes rule 6.
28-6
Menu 15.1.1 - Address Mapping Rules
Local End IP
---------------
Action= None
Press ENTER to Confirm or ESC to Cancel:

Figure 28-6 Menu 15.1.1: First Set

(described later) and the values are displayed here.
Global Start IP Global End IP
--------------- ---------------
Select Rule= N/A
Type
------
NAT