ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual page 43

LINK
SYSTEM General
DDNS
Password
Time Setting
LAN IP
Static DHCP
IP Alias
WIRELESS LAN Wireless
(This feature is
MAC Filter
not available on
802.1X
the ZyWALL 2.)
WAN Route
WAN ISP
WAN IP
WAN MAC
Traffic Redirect
Dial Backup
SUA/NAT SUA Server
Address
Mapping
Trigger Port
STATIC ROUTE IP Static Route
FIREWALL Summary
Attack Alert
Introducing the Web Configurator
Table 2-1 Web Configurator Screens Summary
TAB
Use this screen to configure general system settings.
Use this screen to configure Dynamic Domain Name System
settings.
Use this screen to change your password.
Use this screen to change your ZyWALL's time and date.
Use this screen to configure LAN DHCP and TCP/IP settings.
Use this screen to assign fixed IP addresses on the LAN.
Use this screen to partition your LAN interface into subnets.
Use this screen to configure the wireless LAN settings.
Use this screen to change MAC filter settings on the ZyWALL.
Use this screen to configure the ZyWALL's WLAN authentication
settings.
This screen allows you to configure route priority and traffic redirect
properties.
Use this screen to configure Internet Service Provider parameters.
Use this screen to configure WAN IP address settings.
Use this screen to configure WAN MAC address settings.
Use this screen to configure your traffic redirect properties and
parameters.
Use this screen to configure the backup WAN dial-up connection.
Use this screen to configure servers behind the ZyWALL.
Use this screen to configure network address translation mapping
rules.
Use this screen to change your ZyWALL's trigger port settings.
Use this screen to configure IP static routes.
This screen shows a summary of the firewall rules, and allows you to
edit/add firewall rules.
Use this screen to configure the threshold for DoS attacks.
ZyWALL 2 Series User's Guide
FUNCTION
2-5