Benefits Of The Acx2000 And Acx2100 Routers; Acx2000 Router Description - Juniper ACX2000 Hardware Manual

The ACX Series router is powered by Junos OS, supporting extensive L2 and L3 features, IP and MPLS
with traffic engineering, rich network management, fault management, service monitoring and Operation,
Administration, and Maintenance (OAM) capabilities, and an open software development kit (SDK) system
that allows providers to customize and integrate operations with their own management systems. For a
list of related Junos OS documentation, see https://www.juniper.net/documentation/software/junos/.
As part of the mobile backhaul, the ACX Series router at the cell site and the MX Series router at the
aggregation layer provide comprehensive end-to-end Ethernet, MPLS, and OAM features with the one
Junos OS running on both platforms.
The compact routers are one rack unit (U; that is, 1.75 in., or 4.45 cm) tall. Several routers can be stacked
in a single floor-to-ceiling rack for increased port density per unit of floor space.
The chassis is a rigid sheet metal structure that houses all the other router components. The chassis
measures 1.75 in. (4.45 cm) high, 9.4 in. (24 cm) deep, and 17.5 in. (44.5 cm) wide. The outer edges of the
mounting brackets extend the width to 19 in. (48 cm) (from the front-mounting brackets to the rear of the
chassis). The chassis installs in standard 300-mm deep (or larger) enclosed cabinets, 19-in. equipment
racks, or telco open-frame racks.

Benefits of the ACX2000 and ACX2100 Routers

Improved operational efficiency with zero-touch deployment (ZTD)—The ACX Series routers support
a zero-touch deployment (ZTD) model that significantly reduces the time for any new equipment
installation and provisioning, resulting in improved operational efficiency.
Installation flexibility with an environmentally hardened design—Most ACX Series routers are temperature
hardened and support passive cooling for outdoor deployments in extreme weather conditions.

ACX2000 Router Description

The ACX2000 router contains sixteen T1/E1 ports, six Gigabit Ethernet ports, and two PoE ports. The
ACX2000 router also supports installation of two Gigabit Ethernet SFP transceivers and two 10-Gigabit
Ethernet SFP+ transceivers.
The ACX2000 router has one "pseudo" Flexible PIC Concentrator (FPC 0), and four "pseudo" PICs (PIC 0
through 3).
Figure 1 on page 19 shows the front view of the ACX2000 router.
view.
Figure 2 on page 19 shows the rear
18