Connecting The Acx2000 And Acx2100 To External Devices - Juniper ACX2000 Hardware Manual

5. Dress the power cord appropriately. Verify that the power cord does not block the air exhaust and
access to router components, or drape where people could trip on it.
6. Repeat Step 1 through Step
7. Observe the system LED on the router. If an AC power supply is functioning normally, the system LED
lights green steadily.
If the system LED is not lit, the power supply is not functioning normally. Repeat the cabling procedures.
Figure 23: Connecting AC Power to the Router
SEE ALSO
ACX2000 and ACX2100 Power Overview | 62
ACX2100 AC Power Specifications | 62
Connecting the ACX2000 and ACX2100 to External
Devices
IN THIS SECTION
Connecting ACX2000 or ACX2100 Routers to Management Devices | 106
Connecting ACX2000 or ACX2100 Routers to External Clocking Devices | 108
Connecting ACX2000 or ACX2100 Routers to an External Alarm-Reporting Device | 110
5 for the remaining power supplies.
105