T1/E1 Port Leds; Ethernet Port Leds - Juniper ACX2000 Hardware Manual

Table 12: System LED on the Front Panel
Label Color
SYS Green
Red

T1/E1 Port LEDs

The front panel has sixteen T1/E1 ports, each with one pair of port LEDs.
the LEDs in more detail.
Table 13: T1/E1 Port LEDs
Name Location
Link Left
Link Right
(remote
alarms)

Ethernet Port LEDs

The front panel of the ACX2000 router has six Gigabit Ethernet RJ-45 ports, and the ACX2100 router has
eight Gigabit Ethernet RJ-45 ports, each with one pair of port LEDs.
LEDs in more detail.
State Description
Blinking Router is transitioning online.
On Router is functioning normally.
steadily
Blinking Router has reported an alarm.
On Router has failed.
steadily
Color Description
Green Online with no alarms or failures.
Red Active with a local alarm; router has detected a failure.
– Not enabled.
Yellow Online with alarms for remote failures.
Table 13 on page 58
Table 14 on page 59 describes the
58
describes