Juniper ACX2000 Hardware Manual page 49

External clocking ports supporting 1PPS and 10MHz input and output
Network ports and corresponding status LEDs:
Sixteen T1/E1 ports labeled 0/0/0 through 0/0/15
Four Gigabit Ethernet (GE) ports labeled 1/0/0 through 1/0/3
Combination (COMBO) ports labeled 1/1/0 through 1/1/3, either:
Four Gigabit Ethernet RJ-45 ports
Four Gigabit Ethernet SFP ports
Two Gigabit Ethernet (GE) ports labeled 1/2/0 through 1/2/1 that accept SFP transceivers
Two 10-Gigabit Ethernet (XE) ports labeled 1/3/0 and 1/3/1 that accept SFP+ transceivers
Figure 10: Front Panel of the AC-Powered ACX2100 Router
1 2 3 4
ACX2100
MGMT CONSOLE/AUX
ALARM
1PPS 10MHz
IN OUT IN OUT
0 1
SYS EXT REF CLK IN
15 14 13 12
1 AC inlets
—
2 Management Ethernet port
—
3 Console or auxiliary port
—
4 Alarm contact port
—
5 T1/E1 network ports
—
6 Gigabit Ethernet network ports
—
7 Combination Gigabit Ethernet RJ-45 ports
—
8 ESD point
—
5 6
T1/E1 GE
0/0/8 0/0/9 0/0/10 0/0/11 0/0/12 0/0/13 0/0/14 0/0/15 1/0/2
0/0/0 0/0/1 0/0/2 0/0/3 0/0/4 0/0/5 0/0/6 0/0/7 1/0/0
7 8
1/0/3 1/1/2 1/1/3
1/1/2 1/1/3 1/2/1
1/0/1 1/1/0 1/1/1
COMBO PORTS 1/1/0 1/1/1 GE 1/2/0 1/3/0 XE 1/3/1
11 10 9
9 Ten-Gigabit Ethernet SFP+ ports
—
10 Gigabit Ethernet SFP ports
—
11 Combination Gigabit Ethernet SFP ports
—
12 External clocking ports
—
13 External clocking input port
—
14 USB ports
—
15 System LED
—
49