Juniper ACX2000 Hardware Manual page 23

Table 4: CLI Equivalents of Terms Used in Documentation for ACX2100 Routers (continued)
Hardware
Item (as Description (as
displayed displayed in the
in the CLI) CLI)
PIC (n) Abbreviated name of
the Physical
Interface Card (PIC)
16x T1/E1 (RJ-48)
4x 1GE (RJ-45)
One of the following:
4x 1GE (RJ-45)
4x 1GE (SFP)
2x 1GE (SFP)
2x 10GE (SFP+)
Xcvr (n) Abbreviated name of
the transceiver
Power Built-in power
supply (n) supply
Value (as
displayed in the
CLI) Item in Documentation
n is a value in the The router does not have
range of 0–3. actual PIC devices; see
entries for PIC 0 through
PIC 3 for the equivalent
item on the router.
PIC 0 on FPC 0 Built-in network ports on
the front panel of the
router
PIC 0 on FPC 1 Built-in network ports on
the front panel of the
router
PIC 1 on FPC 1 Built-in uplink ports on
the front panel of the
router
PIC 2 on FPC 1 Built-in uplink ports on
the front panel of the
router
PIC 3 on FPC 1 Built-in uplink ports on
the front panel of the
router
n is a value Optical transceivers
equivalent to the
number of the
port in which the
transceiver is
installed.
Value of n is AC or DC power supply
always 0.
Additional Information
Interface Naming Conventions
Used in the Junos OS Operational
Commands
"ACX2000 and ACX2100
Universal Metro Router
Overview" on page 17
"ACX2000 and ACX2100
Universal Metro Router
Overview" on page 17
"ACX2000 and ACX2100
Universal Metro Router
Overview" on page 17
"ACX2000 and ACX2100
Universal Metro Router
Overview" on page 17
"ACX2000 and ACX2100
Universal Metro Router
Overview" on page 17
"Uplink Ports on ACX2000 and
ACX2100 Routers" on page 50
"ACX2000 and ACX2100 Power
Overview" on page 62
23