General Site Guidelines; Site Electrical Wiring Guidelines - Juniper ACX2000 Hardware Manual

ACX2000 and ACX2100 Router Environmental Specifications | 73
ACX2000 and ACX2100 Chassis Grounding Cable and Lug Specifications | 74
Cabinet Requirements for ACX2000 and ACX2100 Routers | 76
Rack Requirements for ACX2000 and ACX2100 Routers | 78

General Site Guidelines

Efficient device operation requires proper site planning and maintenance and proper layout of the equipment,
rack or cabinet (if used), and wiring closet.
To plan and create an acceptable operating environment for your device and prevent environmentally
caused equipment failures:
Keep the area around the chassis free from dust and conductive material, such as metal flakes.
Follow prescribed airflow guidelines to ensure that the cooling system functions properly and that
exhaust from other equipment does not blow into the intake vents of the device.
Follow the prescribed electrostatic discharge (ESD) prevention procedures to prevent damaging the
equipment. Static discharge can cause components to fail completely or intermittently over time.
Install the device in a secure area, so that only authorized personnel can access the device.

Site Electrical Wiring Guidelines

Table 23 on page 71 describes the factors you must consider while planning the electrical wiring at your
site.
WARNING:
electrical surge-suppression devices.
You must provide a properly grounded and shielded environment and use
70