Gigabit Ethernet Rj-45 Ports; Poe Ports - Juniper ACX2000 Hardware Manual

Table 6: T1/E1 Port Features (continued)
Feature
Cable
Connector
Port numbering (hardware)
Port numbering (software)

Gigabit Ethernet RJ-45 Ports

The front panel of the ACX2000 router has six Gigabit Ethernet RJ-45 ports, and the ACX2100 router has
eight Gigabit Ethernet RJ-45 ports.
Table 7: RJ-45 Port Features
Feature
Supported standards
Cable
Connector
Port numbering (hardware)
Port numbering (software)

PoE Ports

Each ACX2000 router has two PoE Gigabit Ethernet ports. These ports allow you to plug in devices that
require both network connectivity and electric power such as IP phones, wireless access points, and security
cameras. Table 8 on page 53
Description
Category 5 shielded twisted pair
100-ohm RJ-48 connector
0/0/0 through 0/0/15
T1 framing (default): ct1-0/0/0 through ct1-0/0/15
E1 framing: ce1-0/0/0 through ce1-0/0/15
Table 7 on page 52
Description
10BASE-T Copper
100BASE-T
1000BASE-T
Category 5
RJ-45
ACX2000: 0/1/0 through 0/1/2 and 0/1/4 through 0/1/6
ACX2100: 1/0/0 through 1/0/3 and 1/1/0 through 1/1/3
ACX2000: ge-0/1/0 through ge-0/1/2 and ge-0/1/4 through ge-0/1/6
ACX2100: ge-1/0/0 through ge-1/0/3 and ge-1/1/0 through ge-1/1/3
describes the ports in more detail.
describes the ports in more detail.
52