FP2 positioning Unit
Turning the Power ON and OFF, and Booting the System Turning the
5.3 Procedure for Turning ON the Power
When turning ON the power to the system incorporating the positioning unit, the nature and statuses of
any external devices connected to the system should be taken into consideration, and sufficient care
should be taken that turning ON the power does not initiate unexpected movements or operations.
5.3.1 Procedure for Turning ON the Power
Procedure:
1. Turn ON the power supplies for input and output devices connected to the PLC (including the power
supply for the line driver output or open collector output).
2. Turn ON the power supply for the PLC.
3. Turn ON the power supply for the motor driver.
5-5