Headlamp Bulb Replacement; Headlamp Housing Removal - Polaris Ranger 500 2x4 2007 Service Manual

ELECTRICAL
6. Adjust the beam to desired position. Repeat the procedure
to adjust the other headlight.
Due to the nature of light utility vehicles and
where they are operated, headlight lenses
become dirty. Frequent washing is necessary to
maintain lighting quality. Riding with poor
lighting can result in severe injury or death.

Headlamp Bulb Replacement

1. Open the hood.
2. Unplug the headlamp bulb (A) from the wiring harness. Be
sure to pull on the connector, not on the wiring.
3. Turn the lamp counterclockwise to remove it.
A
4. Insert new bulb. Reinstall the harness assembly into the
headlight assembly.
NOTE: Make sure the tab on the lamp locates
properly in the housing.
10.8
WARNING

Headlamp Housing Removal

1. Open the hood.
2. Unplug the headlamp from the wiring harness. Be sure to
pull on the connector, not on the wiring.
3. Remove the O-ring (A) from the headlamp brackets (both
sides)
B
4. After the O-rings are removed from the headlamp, Remove
the adjustment screw (B) and pull the headlamp from the
brackets.
A