10. Install brake caliper using new bolts. Tighten bolts to
specified torque.
Brake Caliper Bolt Torque
18 ft. lbs. (24 Nm)
Exploded View (4X4)
Disc Brake
18 ft. lbs. (24 Nm)
Use new bolts with
pre-applied
locking agent.
11. Install wheel, washers, wheel nuts, and tighten evenly in a
18 ft. lbs.
cross pattern to specified torque.
(24 Nm)
Refer to "Torque Specifications" on Page 7.2
Stud
Front Hub
Rim
70 ft. lbs. (95 Nm)
CAUTION
New bolts have a pre-applied locking agent
which is destroyed upon removal. Always use
new brake caliper mounting bolts
upon assembly.
Flange Nuts:
Flat side against wheel
Tire
Washer
Slotted Nut
FINAL DRIVE
Wheel Nut
(Spec on page 7.2)
Dust Cover
Cotter Pin
7.7
7