Exploded View (4X4) - Polaris Ranger 500 2x4 2007 Service Manual

BRAKES
PARKING BRAKE CALIPER SERVICE
Exploded View
Pad & Holder
18 ft. lbs.
(24 Nm)
Sleeve
Hex Head
Mount Bolt
Nut
Caliper Removal
NOTE: Do no get oil, grease, or fluid on the park
brake pads. Damage to or contamination of the pads
may cause the pads to function improperly.
1. Remove the clip pin and pin (A) from the park brake cable.
A
NOTE: Be sure the park brake is not engaged.
9.10
Pad & Holder
Thrust Washer
Compression Spring
Shim Pack
Lever
(4 Shims)
Spring Pin
2. If replacing the brake pads, slightly loosen the caliper
assembly bolts before removing the complete caliper
assembly. This will ease the caliper disassembly procedure
later.
Plain Washer
Asm. Bolt
25 ft. lbs.
(34 Nm)
Stationary Actuator
Steel Balls (3)
Hex Nut
Figure 9.10