PVT SYSTEM SERVICE
PVT Sealing, Guard, and Ducting
Components
Inner Cover
Inner Cover Seal
Disassembly
Some fasteners and procedures will vary. Refer to the
appropriate parts manual for proper fasteners and fastener
placement.
1.
Remove seat.
2.
Remove or loosen LH rear fender fasteners as necessary to
gain access to PVT outer cover.
3.
Remove PVT air outlet duct hose.
4.
Remove outer PVT cover screws.
5.
Mark the drive belt direction of rotation and remove drive
belt. See "Drive Belt Removal".
SEALING AND DUCTING COMPONENTS
Clutch Outlet Duct
Retainer
Outer Cover Seal
A
B
Cover Bolts
6.
Install the Drive Clutch Holder (PN 9314177) (A).
7.
Remove drive clutch retaining bolt and remove drive clutch
using the Drive Clutch Puller (PN 2870506) (B).
Drive Clutch Puller (PN 2870506)
Drive Clutch Holder (PN 9314177)
8.
Remove the driven clutch retaining bolt and driven clutch.
CLUTCHING
Clamps
PVT Outer Cover
6.5
6