MULTI-PORT FUEL INJECTION DISASSEMBLY AND REASSEMBLY
Knock Sensor (KS) Module
REMOVAL
1. Remove Knock Sensor from electrical bracket.
Typical
2. Disconnect electrical connector at Knock Sensor (KS) module.
CLEANING AND INSPECTION
1. Clean the external surfaces of the KS module with a dry cloth.
2. Inspect surfaces of KS module for evidence of damage.
Index
Page 5C-24
Downloaded from
https://needmanual.com/
Refer to "Precautions" in this section, BEFORE proceeding.
a
a -
Electrical Bracket
b -
Knock Sensor (KS) Module
NOTICE
b
SERVICE MANUAL NUMBER 23
72801
90-861326--1 MARCH 1999