Mercury MerCruiser MCM 454 Mag MPI Service Manual page 936

VELVET DRIVE 5000A DOWN ANGLE TRANSMISSION
Transmission Shift Lever and Shift Cable Bracket
1. The lever has three holes as illustrated following. For use with Quicksilver shift cables,
the anchor stud is located in the middle hole.
Avoid serious personal injury or property damage caused by improper shifting.
Anchor stud for shift cable must be installed in the correct hole when using bracket
with four anchor location holes.
2. Be certain anchor stud is installed in the lower, front hole as shown in the illustration fol-
lowing.
Index
Page 8B-8
Downloaded from https://needmanual.com/
a - Shift Lever
b - Shift Cable Anchor Stud Location (For Quicksilver Shift Cables)
a - Cable Bracket
b - Shift Cable Anchor Stud Location (For Quicksilver Shift Cables)
b
a
WARNING
SERVICE MANUAL NUMBER 23
73249
a
b
74090
90-861326--1 MARCH 1999