Mercury MerCruiser MCM 454 Mag MPI Service Manual page 129

SERVICE MANUAL NUMBER 23
4. Install cable end guide on throttle lever, then push cable barrel end lightly toward throttle
5. Secure throttle cable with hardware as shown and tighten securely.
6. Place remote control throttle lever in the wide open throttle (W.O.T.) position. Ensure
Index Index
90-861326--1 MARCH 1999
Downloaded from https://needmanual.com/
lever end. (This will place a slight preload on shift cable to avoid slack in cable when
moving remote control lever.) Adjust barrel on throttle cable to align with hole in anchor
plate. Ensure hole in barrel positions cable as shown.
a - Cable Barrel
b - Anchor Plate
a - Washer and Locknut
that throttle plate is completely open.
a - Throttle Plate
MCM MODELS - BRAVO AND BLACKHAWK DRIVES
a
b
a
75455
a
75454
a
75453
Page 2A-17