Preparation; Removal - Mercury MerCruiser MCM 454 Mag MPI Service Manual

SERVICE MANUAL NUMBER 23

Preparation

Disconnect battery cables at battery before removing starter.
1. Disconnect battery cables from battery.
2. Disconnect wires from solenoid terminals.

Removal

1. Remove starter mounting bolts.
2. Pull starter assembly away from flywheel and remove from engine.
Index
90-861326--1 MARCH 1999
Downloaded from https://needmanual.com/
1 - End Housing
2 - End Housing Bushing
3 - Thrust Collar
4 - Retaining Ring - Pinion Stop Collar
5 - Pinion Stop Collar
6 - Clutch Drive Assembly
7 - Bearing Plate
8 - Bearing Plate Bushing
9 - Bearing Plate Washer
10 - Bearing Plate Screw
11 - Armature
12 - Pole Shoe - Field Coil
13 - Pole Shoe - Field Coil Screw
14 - Field Coil Grommet - Field Frame
15 - Field Coil Assembly
16 - Leather Washer - Commutator End Frame
17 - Lower Commutator End Frame
18 - Screw/Stud
19 - Insulator Holder - Field Frame Brush
20 - Field Frame Brush - Ground Brush
21 - Field Frame Brush
22 - Brush Lead Screw
23 - Ground And Insulated Holders Support Package
24 - Field Frame Brush Spring
25 - Dowel Pin - Field Frame
26 - Shift Lever
27 - Shift Lever Stud
28 - Shift Lever Stud Washer
29 - Shift Lever Stud Nut
30 - Shift Lever Plunger
31 - Plunger To Shift Lever Pin
32 - Plunger Return Spring
33 - Solenoid Switch Screw
34 - Solenoid Switch Assembly
WARNING
STARTING SYSTEM
Page 4A-7