Repair - Mercury MerCruiser MCM 454 Mag MPI Service Manual

DRIVE SHAFT / PROPELLER SHAFT MODELS
3. Remove drive shaft fasteners and drive shaft.
Engine End Shown (Transom End Similar)

Repair

Be sure U-joint locking rings are seated properly after replacing U-joints.
1. Replace U-joints, if required.
2. Replace flange, if required.
Index
Page 8F-6
Downloaded from https://needmanual.com/
a - Output Shaft Flange
b - Drive Shaft
c - Bolt With Nut (4 Total)
a
b
a - Flange
b - U-Joint
c - Drive Shaft
a
c
b
CAUTION
c
b
SERVICE MANUAL NUMBER 23
70237
a
90-861326--1 MARCH 1999