SERVICE MANUAL NUMBER 23
7. Reinstall flame arrestor and tighten screws securely. Connect crankcase vent hose to
7.4L MPI MODELS
1. Place remote control handle(s) in neutral idle position.
2. Remove port side engine cover.
IMPORTANT: Be sure that cable is routed to avoid sharp bends and/or contact with
moving parts. DO NOT fasten any items to throttle cable. Outer cable must be free to
move when cable is actuated.
3. Remove flame arrestor.
Index
90-861326--1 MARCH 1999
Downloaded from
https://needmanual.com/
MCM MODELS - BRAVO AND BLACKHAWK DRIVES WITH DRIVESHAFT EXTENSION
flame arrestor as shown.
a
a -
Crankcase Vent Hose
b
a -
Flame Arrestor
b -
Clamp
a
75115
75447
Page 2B-19