Mercury MerCruiser MCM 454 Mag MPI Service Manual page 175

SERVICE MANUAL NUMBER 23
IMPORTANT: The distance between studs (Dimension "C") shown in the following
illustration is set at 7-1/8 in. (318 mm).
1. Connect and adjust Quicksilver shift cable(s) as outlined following:
Avoid serious injury or property damage caused by improper shifting. Anchor stud
for shift cable must be installed in the correct hole.
Index Index
90-861326--1 MARCH 1999
Downloaded from https://needmanual.com/
8 Down Angle Shown (V-Drive Similar)
a - Shift Lever
b - Anchor Stud
c - Dimension Between Studs - 7-1/8 In. (318 mm)
d - Shift Cable Bracket
a. Be certain anchor stud is installed in the front hole as shown in the illustration
following.
a - Shift Cable Bracket
b - Anchor Stud In Front Hole
b. Place remote control shift lever and transmission shift lever in neutral position.
c. Remove nuts and washers from shift cable attaching studs.
c
b
d
WARNING
b
a
MIE MODELS - VELVET DRIVE TRANSMISSION
b
a
73284
73284
Page 2C-21