Mercury MerCruiser MCM 454 Mag MPI Service Manual page 123

SERVICE MANUAL NUMBER 23
2. Connect trim position sender leads from gimbal housing to leads from engine harness.
IMPORTANT: Do not attach any accessory ground (–) wires to transom plate ground
point. Accessory ground wires should only be attached to ground stud on engine.
3. Connect continuity wire between transom plate and engine ground (–) stud.
4. Connect any grounding wires or accessories that may have been disconnected.
Index Index
90-861326--1 MARCH 1999
Downloaded from https://needmanual.com/
a - BROWN/WHITE (From Engine Harness)
b - BLACK (From Engine Harness)
c - BLACK (From Transom)
d - BLACK (From Transom Assembly)
a - Continuity Wire
b - Engine Ground (-) Stud
MCM MODELS - BRAVO AND BLACKHAWK DRIVES
b
a
d
c
b
a
72582
71651
Page 2A-11