SEAWATER COOLED MODELS
2. Press hub off shaft with Universal Puller Plate and an arbor press.
3. Puncture front oil seal with a tool and pry from bearing housing.
4. Remove snap ring from bearing housing bore and press shaft and bearings out pulley
end of housing. Bearings have a slip fit in housing; do not use excessive force.
Index
Page 6A-14
Downloaded from
https://needmanual.com/
a -
Universal Puller Plate
a -
Snap Ring
a
a
72657
SERVICE MANUAL NUMBER 23
72648
72649
a
72658
90-861326--1 MARCH 1999